Thinklogical TLX Matrix Switch SNMP Traps Manuale Utente Scaricare il pdf (Pagina 10)

TLX Matrix Switch SNMP Traps Manual 6 Rev. E - July, 2015

Low RX Power Alarm Begin and Clear

An SFP module has the ability to monitor and trigger an alarm on a high or low RX laser power reading.

This ability is internal to the SFP and is part of the digital diagnostic interface common to many SFPs. This

notification is sent when bit 6 of byte 113 in the real-time diagnostic registers changes from 0 to 1 (Begin) or

from a 1 to a 0 (Clear).

This bit is set when the SFP received laser power falls below the low power alarm level. The SFP RX power

value is stored at bytes 104 & 105 of the SFP diagnostic register table.

Begin OID: 1,3,6,1,4,1,17658,2,2,2,0,19

Clear OID: 1,3,6,1,4,1,17658,2,2,2,0,20

Objects:

1: sfpLabel

2: sfpTemperature

3: sfpThresholdLowRxPowerAlarm

4: sysContact

5: sysDescr

6: sysLocation

7: sysName

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Nessun commento

Thinklogical TLX Matrix Switch SNMP Traps Manuale Utente Pagina 10